Stargate Project: Terrain

An important part of my Stargate project is the terrain. The original movie featured Egyptian buildings in a desert setting, while the tv show retained the buildings but took place on a variety of worlds.  Most of those worlds bear a suspicious resemblance to the Pacific Northwest, since it was filmed in British Columbia.  While the show broadened out its settings to other historical eras from classical to medieval, I wanted my project to focus on the original Egyptian style.  So a set of Ancient Egyptian terrain pieces was required.  A bonus is that all of these pieces can be used in historical games as well.

In October 2024 while visiting my friend Mike in Ohio, he gave me a large box of Ancient Egyptian pieces that he had acquired over a decade ago from another gamer and didn't have any plans for.  It was all from the Armorcast line.  In early 2025 I started painting them.  My goal was the sandstone look of Ancient Egyptian monuments we are all familiar with.  I normally paint buildings one at a time, but since I was going to paint them all in the same style, I did two large batches.  

I started by spray priming them with two coats of Army Painter Skeleton Bone.  Next was an application of Skeleton Bone with a large brush, to cover any areas the spray didn't fully cover and to give a nice even base.  Some of the pieces had details that I painted individually.  Then I gave them a wash with watered down Army Painter Soft Tone.  This shaded in the reliefs and other details.  The final step was two coats of Krylon Matte Varnish.

This post has all the larger pieces, there will be a second post with the smaller items.  

First up are my favorites and the most detailed; two identical small buildings with reliefs on each side and a large scarab beetle on top  The reliefs were large enough for the detail to be easily visible when painted in the style that Egyptian temples were decorated.  For the scarabs I wanted to do something different.  My friend Mike has experimented with color-shifting paints and after a discussion with him, I bought a bottle of Folk Art Purple Flash.  You have to paint it over a black base.  I tried using a blue metallic base on one but it did't turn out well so I started over with black.  The color-shift paint goes on as a transparent purple and dries as a purple-blue that does appear different as you look from different angles.  I like the way they turned out.

Each side is different: the one on the left shows the rear and the one on the right shows the front.

Right and left sides

The top with a 28mm Macedonian from Aventine for scale.

One more look at the front.

Two small pyramids.  What treasures are beyond those doors? The miniature is a 28mm Egyptian from Footsore's Gangs of Rome range.  

Two statues of Anubis.  I used ancient representations of Anubis as a guide, so began with the same Skeleton Bone base, then applied two coats of GW Black Templar contrast paint, and added the gold details last.

The last of the Armorcast pieces.  It came in two sections, the base and the vertical obelisk.  The base section is very busy, with an eagle (or falcon?) at each corner.  The wash didn't turn out as well on it but I'm sure it will look fine on the table.

I acquired 7 identical large Egyptian statues at the 2025 Siege of Augusta convention from Garrison 3D out of Florida.  I recall that they were left over from a special project so not part of their normal product line.  They are 6.25 inches/5.9 cm tall and will certainly add to the atmosphere.  I am not sure what material they are made of, they aren't the usual 3d prints.  The surface is very rough and a bit pockmarked and they soaked up a lot of paint.  I skipped the soft tone wash on these after I tested a small area on one and couldn't tell much difference.  You can see that they tower over the 28mm miniature.